fire sense patio heater parts
The gas fire pit valve control assembly kit is suitable for most low-pressure systems without a pilot burner for outdoor fire pits or fireplaces. The maximum BTU rating is 50,000.
The valve is a flame failure valve and must work in conjunction with a thermocouple.
Operation Instructions:
The kit is suitable for a low-pressure system with a maximum of 65mbar (1/2 PSI) and can be used for gas fire pits, fireplaces, or other gas heaters, as long as the thread can be connected.
The kit includes: - 1 x 24" Thermocouple - 1 x Bakelite Knob with 6mm insert - 1 x Gas Valve with 3/8" male flare
Common parts for a propane fire pit.
Possible reasons for the valve sticking after turning: a. The thermocouple head is not heated in the right place, so please adjust the thermocouple tip position. b. The connection between the thermocouple end and the valve is not tight enough or too tight, so please adjust the screw again. c. You need to push the valve first, then turn the spindle and hold it for a few seconds. It cannot stick immediately and may need 10-30 seconds.
Key features: - The valve is a flame failure valve with a maximum BTU of 50,000. - The Thermocouple is 24" long. - The Valve has 3/8" Male Flare threads on both sides. - The Knob can be replaced if you don't like it (with a 0.236inch/6mm stem). - The Gas Valve has Inlet & Outlet with 3/8" Male Flare Threads. - The Bakelite Knob is high temperature resistant up to 120°C.
This is a common part for a fire pit gas valve control assembly.
product information:
| Attribute | Value | ||||
|---|---|---|---|---|---|
| package_dimensions | 5.51 x 3.07 x 1.93 inches | ||||
| item_weight | 6.4 ounces | ||||
| manufacturer | MNS | ||||
| customer_reviews |
| ||||
| best_sellers_rank | #69,210 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden) #58 in Fire Pit & Outdoor Fireplace Parts | ||||
| is_discontinued_by_manufacturer | No |